Экологичная Строительная Плита
Огнестойкая Плита
Звукоизоляция
Устойчивость К Термитам
0102030405
Кальций-силикатная плита Forest от Китайских поставщиков: универсальное решение от фабрики для строительства
-
Excellent fire resistance
Non-combustible class A material
-
Superior water proofing ability
Good moisture resisting ability, not easy to generate swelling or shaping.
-
High Strength
The wall of Calcium Silicate board is very strong and durable, not easy to be damaged.
-
Wonderful sound and heat insulation performance
Filled with mineral wool, not only heat insulation but also sound insulation
-
Stable Dimensions
Both moisture movement and the shrinking percentage are controlled in a optimum range.
🔬
Test Results / Результаты испытаний
| Предел прочности на разрыв (МПа) | Негорючесть | Влажностное расширение (%) | |
| Требование стандарта | ≥ 4 | A1 | ≤ 0,25 |
| Результат испытания | 8,1 | A1 | 0,19 |
| Заключение | Соответствует | Соответствует | Соответствует |
📐
Specifications / Технические характеристики
| Толщина (мм) | Плотность | Длина × ширина (мм) | Обработка поверхности |
| 4 – 25 |
Обычный тип: 1,2–1,5 г/см³ Высокоплотный тип: 1,6–2,0 г/см³ |
2400×1200 Возможно изготовление по индивидуальному размеру |
Без ленточного шлифования; по запросу — шлифование лицевой стороны. Лицевая сторона шлифована лентой; возможно снятие фаски. |
🖼️
Product Gallery / Фотогалерея
❓
Frequently Asked Questions / Часто задаваемые вопросы
What is the fire resistance rating of the calcium silicate board?
The board achieves the highest fire resistance classification — A1 (non-combustible), fully complying with international building safety standards.
What thicknesses are available for the calcium silicate board?
The boards are available in thicknesses ranging from 4 mm to 25 mm, suitable for a wide variety of construction and interior applications.
Can the board be manufactured in custom sizes?
Yes. The standard size is 2400×1200 mm, but custom dimensions can be produced upon request to meet specific project requirements.
What surface treatment options are available?
The boards can be supplied without belt sanding (standard finish) or with a sanded face side. Beveled edges (chamfering) are also available upon request.
What is the tensile strength of the board, and does it meet the standard requirement?
The tested tensile strength is 8.1 MPa, which significantly exceeds the standard requirement of ≥4 MPa, confirming excellent structural performance.
What density types are available, and what are their differences?
Two density types are offered: Standard Type (1.2–1.5 g/cm³) for general building applications, and High-Density Type (1.6–2.0 g/cm³) for applications requiring greater strength and durability.